59Setup-Program
Version Information
The version screen shows information
about the version of software loaded
into the sewing machine and embroi-
dery module (special accessory). This
information is helpful if you are
asking questions of the dealer or if
you plan to upgrade the software.
Setup menu
·press the external Setup button,
menu appears
· touch service
Service Screen
· service screen appears
· select version
Version information
· version screen appears
· shows the version of software
loaded into the artista sewing
machine
· shows the version of software
loaded into the embroidery module
(special accessory), if applicable
· the embroidery module must be
connected to the machine to show
the version on the screen
· the version of software in the
sewing machine and in the
embroidery module must be the
same for optimum results
· touch esc to return to the previous
screen
Calibrating the screen is important
for making on-screen selections by
touch. If the screen is not calibrated,
you may touch one selection and the
machine will read one next to it. For
precision touch selection, the screen
may be calibrated.
Note: The screen is calibrated at
the factory, but shipping and trans-
porting may affect it.
The screen only needs to be cali-
brated if there is a problem with
precision touching.
Screen Calibration
Setup menu
·press the external Setup button,
menu appears
· touch Service
V 3.02
V 3.02
BA_165_engl 16.4.2004 9:34 Uhr Seite 59
030787.52.04_0401_a165_EN
To Next Page
Loading...
Need help?
General
