AutoDome Pipe Mount Installing the Pipe Mount | en 19
Bosch Security Systems, Inc. Installation Guide F.01U.251.410 | 1.0 | 2011.08
2.5.3 Power Supply Box Connections
The following figure is a detailed illustration of the Roof or Pipe
Mount Power Supply Box, which includes the fuse
specifications.
1 Ground Screw 5 Power In
2 Transformer (115/
230 VAC Modes)
6 In/Out; 1/2 in. (15 mm) NPS
Fitting
3 In/Out to Dome 7 Power In; 3/4 in. (20 mm) NPS
Fitting
4 24 VAC to Dome
Interface Board
8 Control Data and Video In/Out;
3/4 in. (20 mm) NPS Fitting
N
N
RO
IN
OU
ND
+
-
P107
XF102 XF103
XF101
5 4 3 2 1
1
2
0
4
2 1
ND
+
-
WARNING!
Fuse replacement by qualified service personnel only. Replace
with same type fuse.