AutoDome Pipe Mount Alarms and Relay Connections | en 49
Bosch Security Systems, Inc. Installation Guide F.01U.251.410 | 1.0 | 2011.08
4.4.2 Configuring an Open Collector Output
Outputs 1, 2, and 3 are open collector types. These outputs
must be connected to a positive voltage between 5 and 32 V to
complete the circuit, with a maximum voltage rating of 32 VDC
@ 150 ma.
1. Connect the appropriate stripped wire to the open
connector (1, 2, or 3) of the transistor.
2. Connect the appropriate stripped wire to the ground
(GND) connector.
To Next Page
Loading...
Need help?
General
