18
Chapter 1
OPERATION
•
Open pump cover. Remove the syringe, move the syringe holder into an upright
position and close the front door.
•
Press o for 3 sec. to switch the pump off. The drive moves into parking
position.
Note: The settings will be permanently saved by the switched off device.
Note: Pump cannot be powered off with syringe inserted.
1.6 Standby Mode
In the case of extended interruption, the user has the option to maintain the set values.
•
Press sf to stop the infusion. Then press o for less than 3 sec.
•
Confirm that the pump is supposed to switch into standby by pressing u.
•
The pump is now in Standby.
While the pump is in the standby mode, it’s display shows the drug and the
remaining time for this mode. Change of remaining time by pressing
l. Exit
standby by pressing
c .
As long as a disposable is inserted in the pump will use standby also in case
o is
pressed for at least or more than 3 sec.
To Next Page
Loading...
Need help?
General