Brother MFC-J2310 User Manual

Chapter 1
10
Shortcut Settings 1
You can add the fax, copy and scan settings
you use most frequently by setting them as
your Shortcuts. Later you can recall and
apply these settings quickly and easily. You
can add three Shortcuts.
The following settings can be included in a
fax, copy or scan Shortcut:
Copy
 Quality
 Paper Type
 Paper Size
 Tray Select
1
 Enlarge/Reduce
 Density
 Stack/Sort
 Page Layout
 2-sided Copy
 Advanced Settings
Fax
 Address
 Fax Resolution
 Contrast
 Colour Setting
 Batch TX
 Real Time TX
 Overseas Mode
 Glass Scan Size
Scan (Scan to Media)
 Scan Type
 Resolution
 File Type
 File Name
 Remove Background
Scan (Scan to Network)
Scan (Scan to FTP)
1
MFC-J4610DW only
Adding Shortcuts 1
a Press (Settings).
b Press s or t on the Touchpanel to
display Shortcut Settings.
Press Shortcut Settings.
c Press , or where you have not
added a Shortcut.
NOTE
-Blank- will appear as the name of
available Shortcuts.
d Read the information on the
Touchscreen, and then press Next to
display the modes Copy, Fax and Scan.
e Press Copy, Fax or Scan for the mode
of your new Shortcut.
If you press Scan, press s or t to
display Scan to Media,
Scan to Network or Scan to FTP,
and then press the type of scan you
want to set.
Do one of the following.
 If you press Scan to Media, go to
step f.
 If you press Scan to Network or
Scan to FTP, press s or t to
display the Profile Name, and then
press it. Go to step i.
f Press s or t to display the available
settings for the mode you chose in
step e, and then press the setting you
want to change.
g Press s or t to display the available
options for the setting, and then press
the new option you want to set.
Repeat steps f and g until you have
chosen all the settings for this Shortcut.
h When you have finished choosing
settings, press OK.

Brother MFC-J2310 Specifications

General

Brand	Brother
Model	MFC-J2310
Category	All in One Printer
Language	English