Brother MFC-J2310 User Manual

Chapter 4
40
d Enter the fax number.
Using the dial pad
Using (Address)
 Address Book
Using (History)
 Outgoing
 Incoming
e Press Fax Start.
Faxing from the ADF
(MFC-J4410DW and
MFC-J4610DW)
4
 The machine starts scanning the
document to be sent.
Faxing from the scanner glass 4
 If you choose Mono in the
Colour Setting (default setting),
the machine starts scanning the first
page. Go to step f.
 If you choose Colour in the
Colour Setting, the
Touchscreen asks if you want to
send a colour fax. Press
Colour Fax to confirm. The
machine starts dialling and sending
the document.
f When the Touchscreen asks you
Next Page?, do one of the following:
 To send a single page, press
No (Send).
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
Stop faxing 4
To stop faxing, press .
Setting scanner glass size for
faxing 4
When documents are Letter size, you need to
set the Scan Size to Letter. If you do not, the
side portion of the faxes will be missing.
a Load your document.
b Press (Fax).
c Press Options.
d Press s or t on the Touchpanel to
display Glass Scan Size.
e Press Glass Scan Size.
f
Press Letter (or A4).
g Press OK.
h Enter the fax number.
i Press Fax Start.
NOTE
• You can save the setting you use most
often by setting it as the default setting.
(See Advanced User’s Guide: Setting
your changes as a new default.)
• This setting is only available for sending
documents from the scanner glass.

Brother MFC-J2310 Specifications

General

Brand	Brother
Model	MFC-J2310
Category	All in One Printer
Language	English