Brother MFC-J2310 User Manual

64
8
How to copy 8
The following steps show the basic copy
operation.
a Do one of the following to load your
document:
 (MFC-J4410DW and
MFC-J4610DW)
Place the document face down in the
ADF.
(See Using the ADF (MFC-J4410DW
and MFC-J4610DW) on page 36.)
 Place the document face down on
the scanner glass.
(See Using the scanner glass
on page 37.)
b Press (Copy).
 The Touchscreen shows:
1 No. of Copies
You can enter the number of copies by
pressing - or + on the Touchscreen (as
shown above) or by using the dial pad.
c If you want more than one copy, enter
the number (up to 99).
d Press Mono Start or Colour Start.
Stop copying 8
To stop copying, press .
Copy options 8
You can change the following copy settings.
Press Copy and then press Options. Press
s or t on the Touchpanel to scroll through
the copy settings. When the setting you want
is displayed, press it and choose your option.
When you have finished changing options,
press OK.
(Basic User’s Guide)
For information about changing the following
copy settings, see page 65.
 Paper Type
 Paper Size
 Tray Select
1
1
MFC-J4610DW only.
(Advanced User’s Guide)
For information about changing the following
copy settings, see Advanced User’s Guide:
Copy options.
 Quality
 Enlarge/Reduce
 Page Layout
 2in1(ID)
 Stack/Sort
 Density
 2-sided Copy
 Ink Save Mode
 Thin Paper Copy
 Book Copy
 Remove Background
 Set New Default
 Factory Reset
NOTE
(MFC-J4410DW and MFC-J4610DW)
If you want to sort copies, use the ADF.
Making copies 8
1

Brother MFC-J2310 Specifications

General

Brand	Brother
Model	MFC-J2310
Category	All in One Printer
Language	English