74
STYLE FUNCTION
You can choose from eleven different character styles to apply to your text.
☞
Characters printed using the smaller sizes may be difficult to read if certain style settings
(e.g., I+SHADOW) are selected.
The following style settings are available:
NORMAL I+BOLD (italic & bold)
BOLD I+OUTLINE (italic & outline)
OUTLINE I+SOLID (italic & solid)
SOLID I+SHADOW (italic & shadow)
SHADOW VERTICAL
ITALIC
The default style setting is NORMAL. The style indicators at the bottom of the display shows
the current style setting when any setting other than NORMAL is selected.
Refer to
Reference
at the end of this section for samples of the available settings.
To change the style setting:
1 While holding down , press once, and keep held down to display the
current style setting.
2 While still holding down , continue pressing until the desired style setting is
displayed.
☞
The current style setting is shown by the style indicators at the bottom of the dis-
play.
3 Release to apply the selected style setting to the text.
EXAMPLE
To select the I+SHADOW style setting:
1
While holding down , press
once, and keep held down.
Code
Style
œ
@
4
Code
Code
Style
œ
@
4
Code
NORMAL
STYLE
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
Code
Style
œ
@
4
Code
To Next Page
Loading...
Need help?
General