90
PRINT KEY AND FEED & CUT FUNCTION
After you have entered your text and chosen the desired format settings, you are ready to print
the label.
The Feed & Cut function is used to feed out 25 mm of tape and automatically cut it off, for
example after printing with the Auto cut function set to OFF or when printing has been inter-
rupted.
To print a label:
● Press once. The message “WORKING” appears just before printing, and then
“COPIES 1/ 1” is displayed while the label is being printed.
☞
If the Auto cut function is set to ON, the label will automatically be cut off after it is
printed.
To feed and cut off 25 mm of tape:
● Hold down and press once. The message “FEED” appears while 25 mm of
tape is fed out, then automatically cut off.
EXAMPLE
To print a label and cut it off:
1
Press once.
2
Hold down and press .
Mirror
Print
Code
Feed&Cut
Space
Mirror
Print
1/ 1
COPIES
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
WORKING
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
Code
Feed&Cut
Space
To Next Page
Loading...
Need help?
General