Brother P-touch 9700PC User Manual

18
Installing the software for PT-9800PCN
The procedure for installing the software varies depending on the OS of the computer. Installation
procedure is subject to change without notice.
When using Microsoft
®
Windows
®
This section explains how to install P-touch
Editor 5.0, the printer driver, Software User's
Guide (PDF) and Network User's Guide (PDF).
The following is the example for Windows Vista
®
.
1
Start the computer and put the
CD-ROM into the CD-ROM drive.
2
Click [Standard Installation].
Installation items:
 Standard Installation
P-touch Editor 5.0, printer driver,
Software User’s Guide (PDF), and
Network User’s Guide (PDF).
 Custom Installation
P-touch Editor 5.0, printer driver,
Software User’s Guide (PDF), Network
User’s Guide (PDF), and P-touch Editor
Lite LAN can all be installed separately.
 Utility Installation
BRAdmin Light
How to install BRAdmin Light, see page 21.
 User’s Guide
Software User’s Guide (PDF), Network
User’s Guide (PDF), and link to the
download page for Adobe
®
Reader
®
.
3
Read the licence agreement and click
[Yes] if you agree with the terms and
conditions.
Follow the on-screen instructions.
Note
● If you will be using the models “PT-9800PCN”, it is necessary to install the following versions
of P-touch Editor or b-PAC SDK to avoid printing difficulties:
[P-touch Editor] version 5.0.101 and later (included on CD).
[b-PAC SDK] version 3.0.010 and later (download from Brother Solutions Center).
● For details of the software, see the “Software User’s Guide” (PDF).
● For details of the Network, see the “Network User's Guide” (PDF).
● You can find the Software User's Guide or Network User´s Guide (PDF) by clicking “Start” -
“All Programs (Programs)” - “Brother P-touch” - “Manuals” - “PT-9800PCN” - “Software User's
Guide” or “Network User's Guide”.
Note
● When using USB interface cable, do not
connect the printer to the computer until
directed to do so.
● You must be logged on as a user with
administrator privileges to install this software.
● Turn off the printer with the power button
and then with the main power switch.
Note
● If it does not start up automatically, open
the files on the CD-ROM and double-click
on “Setup.exe”.

Brother P-touch 9700PC Specifications

General

Vertical printing	Yes
Maximum resolution	360 x 720 DPI
Standard interfaces	USB 2.0
Tape type	TZ
Tape cutting	Automatic
Internal memory	2 MB
Built-in barcodes	Codabar (NW-7), EAN13, EAN8, Maxicode, Postnet, QR Code, UPC-A, UPC-E
Dimensions (WxDxH)	116 x 192.7 x 140 mm
Minimum system requirements for Macintosh	- RAM 128 MB - HDD 50 MB - USB (1.1/2.0)
Minimum RAM	512 MB
Compatible operating systems	Windows 2000 Pro/XP/7/Vista, Mac OS 10.3.9 - 10.6
Maximum label width	27.1 mm
Maximum label length	8 m
Product color	Gray

Weight and Dimensions

Depth	192.7 mm
Width	116 mm
Height	140 mm
Weight	1570 g