25
Advanced function
After the printer has been connected to the computer, labels can be created and printed.
This section describes various useful print settings and how to use a bar code reader to print labels
without a computer.
■ Printing labels at high speed or a high resolution
See “Printing at a higher speed or at a higher resolution” (→ P. 25)
■ Printing a large number of labels distributed to multiple printers
See “Distributed printing” (→ P. 26)
■ Printing using only a bar code reader without a computer
See “BTP (Bar code Template Print) function” (→ P. 28)
■
Creating and printing simple labels by using P-touch Editor Lite LAN
(PT-9800PCN only)
See “Using P-touch Editor Lite LAN (PT-9800PCN and Windows
®
only)” (→ P. 33)
■ Printing a list of the current printer settings
See “Printing the printer settings” (→ P. 34)
Printing at a higher speed or at a higher resolution
The print speed and resolution can be changed depending on the combination of the type of tape
being used and the selected output setting. With HG tape, labels can be printed at an even faster
speed or higher resolution.
● When HG tape is used, printing can be performed at a faster speed or at a higher resolution than with
TZ tape.
● When HG tape is used with the “High Speed” setting selected, printing can be performed even faster.
However, since the resolution in the feed direction is reduced, this is not suitable for detailed printing.
● When HG tape is used with the “High Resolution” setting selected, printing can be performed with an
even higher resolution. This is suitable for detailed printing of objects such as graphics and curved lines.
● When printing bar codes, use the “Standard” setting, which has identical horizontal and vertical
resolutions.
Output
Tape Type
Resolution
TZ tape HG tape
High Speed
(HG only)
— 80 mm/sec 360 × 180 dpi
Standard 20 mm/sec 52 mm/sec 360 × 360 dpi
High Resolution
(HG Only)
— 20 mm/sec 360 × 720 dpi
Note
● The print speeds listed above indicate the highest speeds possible. The actual speed may
differ depending on the operating conditions.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
