Brother P-touch 9700PC User Manual

41
Appendix
General procedure for the BTP (Bar code Template Print) function
The general procedure for using the BTP (Bar code Template Print) function is described below.
For details on specifying the various settings, refer to “BTP (Bar code Template Print) function”
(→ P. 28).
1
Use P-touch Editor 5.0 to create a template, and then transfer it to the printer.
2
Connect the bar code reader to the printer.
3
Scan the “P-touch template command” bar code.
This allows the settings to be specified or clears the previous settings.
4
Scan the “Basic settings” bar codes.
Specify the cut method and the number of copies to be printed.
5
Specify the appropriate settings (A, B or C).
A. Preset template printing
1.Scan the “Preset template number” bar code.
B. Bar code printing
1.Scan the “Select template” bar code, then the bar codes under “For entering numbers”.
2.Scan the bar code whose data is to be used or copied.
3.Scan the “Begin printing” bar code.
C. Database-assisted label printing
1.Scan the “Select template” bar code, then the bar codes under “For entering numbers”.
2.Scan the key bar code to replace the database data.
3.Scan the “Delimiter” bar code.
4.Scan the “Begin printing” bar code.
6
The specified label is printed.

Brother P-touch 9700PC Specifications

General

Vertical printing	Yes
Maximum resolution	360 x 720 DPI
Standard interfaces	USB 2.0
Tape type	TZ
Tape cutting	Automatic
Internal memory	2 MB
Built-in barcodes	Codabar (NW-7), EAN13, EAN8, Maxicode, Postnet, QR Code, UPC-A, UPC-E
Dimensions (WxDxH)	116 x 192.7 x 140 mm
Minimum system requirements for Macintosh	- RAM 128 MB - HDD 50 MB - USB (1.1/2.0)
Minimum RAM	512 MB
Compatible operating systems	Windows 2000 Pro/XP/7/Vista, Mac OS 10.3.9 - 10.6
Maximum label width	27.1 mm
Maximum label length	8 m
Product color	Gray

Weight and Dimensions

Depth	192.7 mm
Width	116 mm
Height	140 mm
Weight	1570 g