21
■ Installing the BRAdmin Light
configuration utility
The BRAdmin Light is a utility for initial setup
of Brother network connected devices. It can
also search for Brother products on your
network, view the status and configure basic
network settings, such as IP address.
For more information on BRAdmin Light,
visit us at http://solutions.brother.com/
1
Click [Utility Installation].
This screen is the same screen as you
see when you insert the CD-ROM.
2
Click [BRAdmin Light] and follow the
on-screen instructions.
If the Windows Firewall is enabled on
your computer, the message “Do you
wish to add this application to the list
of exceptions?” appears. Check your
computer environment and choose
[Yes] or [No].
■ Setting your IP address, Subnet
Mask and Gateway using BRAdmin
Light
1
Click “Start” - “All Programs
(Programs)” - “Brother” -
“BRAdmin Light”.
BRAdmin Light will search for new
devices automatically.
2
Double-click the unconfigured device.
The default password is “access”.
Note
● If you require more advanced printer
management, use the latest Brother
BRAdmin Professional utility version
that is available as a download from
http://solutions.brother.com/
● If you are using personal firewall software,
BRAdmin Light may fail to detect the
unconfigured device. In that case, disable
your personal firewall software, and try
using BRAdmin Light again. Restart your
personal firewall software after the
address of the unconfigured device is set.
Note
● If you have a DHCP/BOOTP/RARP
server in your network, you don’t have to
do the following operation, because the
print server will automatically obtain its
IP address.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
