21
DESIGINING A STAMP (Stampcreator P-touch Editor)
Changing the character size of a text block
1 Display the Text Properties.
2 With the Select tool, click the block of text to be changed in the stamp
layout. Handles appear around the text block.
• The current character size is shown in the Text Properties.
3 From the “Size” drop-down list, select the desired character size (see
figure 8).
• The selected text is changed.
Using the Maximum button
1 Display the Layout Properties.
2 With the Select tool, click the block of text to be changed in the stamp
layout. Handles appear around the text block.
3 Click the Maximum button in the Layout Properties (see figure 9).
• The size of the text is automatically adjusted to the maximum layout area
of the selected stamp size with the original vertical and horizontal
proportions.
Manual adjustment
1 With the Select tool, click the block of text to be changed in the stamp
layout. Handles appear around the text block.
2 Drag a handle to adjust the text block to the desired size (see figure 10).
• To adjust a text block while keeping the original vertical/horizontal
proportions, use the Select tool to select a corner handle. Then, while
holding down the Shift key, drag the handle.
figure 8
figure 9
figure 10
To Next Page
Loading...
Need help?
General