BASIC TYPING
Cancelling the decimal tab mode
1) Before you have typed anything:
To cancel the decimal tab mode before you have typed anything, press
[CORRECT] at the decimal tab pOSition. The carrier does not move. You
can now enter any character and it will print directly on the paper.
2) After entering some characters:
Press [CORRECTJ until the numbers or the characters on the display
disappear, then press [CORRECT] one more time, You may now start
typing your text and it will print on the paper. The first characterwiII be printed
at the tab position (same as deCimal point position).
TOLR
31 Clearing the decimal tab:
To cancel the decimal tab altogether, press [ALl1 ÷ IT CLR] (8) at the
decimal tab position.
Repeat function
The repeat function allows you to type the same characters many times by just
holding down the corresponding character key. This is useful, for example,
when you want to separate two parts of the text with a line mad e of "-" (hyphens),
To type a character repeatedly, hold down the corresponding key. The
character will be printed once, then the machine will wait a short time (half a
second) and then print the same character repeatedly until you release the key.
The short delay is provided to prevent accidental repetition of the same
character when you want it to be printed only once.
15
To Next Page
Loading...
Need help?
General
