Brother SX-4000 User Manual

P,_PLACING THE RIBBON, ETC.
Replacing the cassette daisy wheel
The daisy wheel is housed in a clear plastic cassette for easy, damage-free
handling and quick typeface changes.
To replace the cassette daisy wheel:
1) Open the top cover,
2) Pull the lever towards you to release the
d_isy wh_.ellock.
3) Remove the cassette daisy wheel by pull-
ing it out of the machine by the protruding
"ear" on the top right,
4) Insert the desired cassette daisy wheel
into the slot and press down gently,
5) Slide the lever back to its original position
to lock the cassette daisy wheel in place.
Make sure to press the lever firmly.
6) Close the top cover.
7) Press [CODE] + [RESET] (Q) to move the
carrier to the previous position.
Make sure the cassette daisy wheel is not
inserted backwards. The "ear" should
always be on the upper right,
Improperinsertion of thecassette daisy
wheelmay causemalfunction and incorrect
printing,
It is notnece_sat3/to remove the cassette
ribbon when replacingthedaisy wheel.
NOTE Please check the shape of your daisy
wheelcassettebeforereplacingthe daisy
wheel. The daisy wheel cassettetype B
cannot be usedwith this machine,
TypeA TypeB
,,,,, ,,,,,, ,,,,,,,
38

Brother SX-4000 Specifications

General

Type	Electronic Typewriter
Keyboard	QWERTY
Printing Method	Daisy wheel
Print Speed	12 characters per second
Features	Automatic Centering, Underlining, Bold Printing
Pitch	10, 12, 15
Characters Per Line	80
Paper Handling	Manual feed
Weight	6.6 kg