Burmester 077 User Manual

22
THE MAIN SETUP
The MAIN SETUP offers the adjustment of functions like BALANCE, FADER, INITIAL VOLUME, VOLUME SCALE,
AMPLIFICATION and CONFIGURATION OF INPUT 6 for the MAIN level.
The following chart provides an overview of all menu items, which can be adjusted in the MAIN SETUP. The factory
settings (defaults) are listed in brackets. Subsequent to the chart you will find a detailed description of the menu
items.
MENU ITEM DESCRIPTION DISPLAY VALUE
Balance Sets volume left/right ratio M-BAL
OFF R, -09R to -01R
(<C>)
-01L to -09L, OFF L
Fader
Selects volume level of RECORD-speakers, only
available during 4 channel mode
FADER
-10 to –01
(<C>)
01 to 10
Initial volume Selects volume after switching on the device M-VOL (01) to 20, LAST
Volume scale Indication in dB or Burmester steps M-SCALE (BUR) / dB
Amplification Total amplification LOW or HIGH M-OUT (LOW) / HIGH
Configuration of INPUT 6 INPUT 6 as regular input or surround input M-IN6 INP / (SURR)
The MAIN SETUP MENU is activated by pulling up the switch key (15) on the front panel or by pressing the MENU
button on your remote control. The display indicates the activation by showing MAIN SETUP, followed by the first
menu item. PLEASE NOTE: In order to activate the MAIN SETUP, the device has to be in MAIN level (REC/MAIN-
LED (5) is not illuminated).
To exit and automatically save the menu push down the switch key (15) or press the MENU button on your remote
control.
Balance Some spatial arrangements require a shift of the volume ratio between the two reproducing
channels. The volume shift is realized by reducing one of the two stereo channels. It is
possible to alleviate one channel of the preamp 077 up to 9 dB (factor 2.8) in steps of 1 dB,
and for specific situations to switch it off completely.
Select menu item M-BAL with the left rotary switch or the navigation buttons
 
on your
remote control.
With the right rotary switch or the navigation buttons
 
on your remote control you may
select the desired value:
<C> both stereo channels of the MAIN level will be reproduced at the same
volume level
-09R to -01R the right channel of the MAIN level will be reproduced with reduced volume
OFF R the right channel of the MAIN level is muted
-09L to -01L the left channel of the MAIN level will be reproduced with reduced volume
OFF L the left channel of the MAIN level is muted
The balance setting has no effect on the SURROUND input.

Burmester 077 Specifications

General

Brand	Burmester
Model	077
Category	Amplifier
Language	English