EasyManuals Logo
Home>CAME>Control Systems>GARD series

CAME GARD series Installation Manual

CAME GARD series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
p.
24
24 - Manual Code:
11
11
9 G V18
9GV18 ver.
1.1
1.1 12/2011 © CAME Cancelli Automatici S.p.a. - The data and information in this manual may be changed at any time and without obligation on the part of Came Cancelli Automatici S.p.a. to notify said changes.
ENGLISH
This product is only intended to be used for the purpose it was designed.Any other use is therefore improper and dangerous.The manu-
facturer is not liable for any damage caused by improper, wrongful or unreasonable use.
Stay away from working mechancal parts.Stay out of the working range of the moving operator.
Do not oppose the movement of the operator as this may result in danger.
Do not allow children to play to loiter within the working range of the operator.Keep transitters and any other command devices away from
children, to prevent the operator from being activated y mistake.
Immediately stop using the operator if any anomaly is manifested.
Danger of hand crushing
Danger high voltage Transit forbidden during
operation
Important general safety instructions
The periodic maintenance to be carried out by customers are:cleaning the photo-
cells' glass, checking the proper working state of the safety devices and making sure
the operator is free of any impediments.
We also recommend to periodically check the lubrication the tightness of the bolts and
screws on the operator.
To check that the safety devices are working properly, wave an object in front of the photo-
cells during closing;if the operator inverts its direction of travel or blocks movement, then the
photocells are working properly.This is the only maintenance job that should be done with the
power source on.
Before doing any maintenance or repair job, cut off the main power, to prevent any danger-
ous situations.
To wipe clean the photocell glass, use a slightly damp cloth, and do not use any solvents or
other chemical products that may ruin the device.
Check that there is not vegetation within range of the photocells, and that no objects inter-
fere with the operation of the automated device.
Safety instructions
Maintenance
Periodic maintenance

Other manuals for CAME GARD series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CAME GARD series and is the answer not in the manual?

CAME GARD series Specifications

General IconGeneral
BrandCAME
ModelGARD series
CategoryControl Systems
LanguageEnglish

Related product manuals