CAME GARD series Installation Manual

338
1007
260 max. 3250
884
265220
p.
6
6 - Manual Code:
11
11
9 G V18
9GV18 ver.
1.1
1.1 12/2011 © CAME Cancelli Automatici S.p.a. - The data and information in this manual may be changed at any time and without obligation on the part of Came Cancelli Automatici S.p.a. to notify said changes.
ENGLISH
Dimensions
Before beginning to install, the following is necessary:
Set up proper omnipolar cut-off device, with more than 3mm of distance between contacts, with sectioned power source;
• Set up proper conduits and electric cable raceways, making sure these are protected from any mechanical damage;
• Set Set up a drainage tube to prevent stagnation of moisture that can lead to oxydation;
• Verificare che le eventuali connessioni interne al contenitore (eseguite per la continuità del circuito di protezione) siano provviste di
isolamento supplementare rispetto ad altre parti conduttrici interne;
Installation must be carried by skilled, qualified technicians in accordance with current regualtions.
Tools and materials
Make sure you have all the tools and materials needed to carry out the installation in total safety and in accordance with current regula-
tions.The figure shows some examples of equipement used by installers
Installation
Preliminary checks

CAME GARD series Specifications

General

Brand	CAME
Model	GARD series
Category	Control Systems
Language	English