CAME GARD series Installation Manual

#
#
p.
4
4 - Manual Code:
11
11
9 G V18
9GV18 ver.
1.1
1.1 12/2011 © CAME Cancelli Automatici S.p.a. - The data and information in this manual may be changed at any time and without obligation on the part of Came Cancelli Automatici S.p.a. to notify said changes.
ENGLISH
The cabinet is made of 2mm-thick galvanised steel varnished with epoxy powders.Features to complement with dedicated Came acces-
sories.
The anchoring base is made of galvanised steel and has four clamps with securing nuts.The arm-attachment flange makes for quick and
safe blocking of the arm. Inside there are: control panel, mechanical safety stops, endpoint assembly, balancing spring and irreversible
gearmotor with die-cast aluminium case. The gearmotor features an endless screw based reduction system which is lubricated by per-
manent fluid grease with rotating parts on lubricated bearings.
001G3250 - varnished galvanised steel barrier ready to fit accessories.
NB - You must request right or left-side barriers when ordering. In this manual only left-hand barriers are shown.
Required accessories:
001G03250 - White varnished semi-elliptical aluminium arm L = 3.5 m, complete with cable cover profile, anti-impact profile, internal
reinforcement, luminous cord, cord connection cable and red reflective adhesive strips.
001G03250DX - White varnished semi-elliptical aluminium arm L = 3.5 m, complete with cable cover profile, anti-impact profile, internal
reinforcement, right hand joint and red reflective adhesive strips.
001G03250SX - White varnished semi-elliptical aluminium arm L = 3.5 m, complete with cable cover profile, anti-impact profile, internal
reinforcement, right hand joint and red reflective adhesive strips.
Optional accessories:
001G0468 - Support for applying DELTA-I and DELTA-SI photocells;
001G04601 - Adaptor for applying flashers of the Kiaro series via its relative 001KIAROS support.
002LB38 Card for connecting three 12 V - 7 Ah emergency batteries.
Important! Check that the command, safety equipment and accessories are CAME originals;this will ensure easy installation and
maintenance of your system.
Motor power supply (V: 24 V DC 50 / 60 50/60 Hz
Maximum draw:15 A
Power: 300 W
Maximum Torque: 200 Nm
Reduction ratio:1/202
Opening time: 2÷6 sec.
Duty cycle Intensive use
IP protection rating: IP54
Weight:47 kg
Insulation class:I
Legend of symbols
Technical data
Intended use and limits to use
Description
Intended use
Limits to use
This symbol means parts must be read carefully.
This symbol means the parts descibe safety issues.
This symbol tells you what to notify to the user.
The 001G3250 barrier is designed and built by © CAME Cancelli Automatici S.p.A. in compliance with current regulations on safety con-
cerning the use of parking facilities in private, public, residential and areas with high fl ow densities.
Any installation or use other than that indicated in this manual is forbidden.
Passage width up to 3.25 metres with 2 to 6 seconds opening time.

CAME GARD series Specifications

General

Brand	CAME
Model	GARD series
Category	Control Systems
Language	English