To Next Page

To Previous Page

Setting Up Connection by Selecting a Wireless Router

19Y4-03H

You can search the wireless routers (or access points) available for connection and select one from the display of the

machine. For the network key, enter a WEP key or TKIP. Before selecting a wireless router, check and write down the

required setup information, including the SSID and network key ( Checking the SSID and Network Key(P. 177) ).

Security settings

If the wireless connection is set up by selecting a wireless router, the WEP authentication method is set to

<Open System> or the WPA/WPA2 encryption method is set to <Auto> (AES-CCMP or TKIP). If you want to select

<Shared Key> for WEP authentication or <AES-CCMP> for WPA/WPA2 encryption, you need to set up the

connection using the manual entry method ( Setting Up Connection by Specifying Detailed

Settings(P. 173) ).

Press .

Use / to select <Network Settings>, and press .

● If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press . Setting

the System Manager PIN(P. 222)

Select <Wireless LAN Settings>, and press .

● If the <Enable the wireless LAN?> message is displayed, select <Yes>, and press .

● If the <Direct Connection will be disabled. Is it OK?> message is displayed, select <Yes>, and press

Read the message that is displayed, and press .

Select <SSID Settings>, and press .

Select <Select Access Point>, and press .

● The machine starts searching for available wireless routers.

Network

170

Canon 1418C025 User Manual

Other manuals for Canon 1418C025