Display
Displays the operation and status screens for copying and other functions, as well as the status of the
machine and error information. Also, view the screen when specifying the settings of the machine.
Display(P. 26) Using the Operation Panel(P. 29)
[Reset] key
Press to cancel the settings and restore the previously specied settings.
[ ] key
● When specifying settings, press to return to the previous screen.
● When entering text, press to move the cursor to the left.
● Press to decrease a setting value such as density for scanning, copying, etc.
[ ] key
● When specifying settings, press to select the item above the currently selected item.
● When changing setting values, press to increase a value.
[ ] key
● When specifying settings, press to proceed to the next screen.
● When entering text, press to move the cursor to the right.
● Press to increase a setting value such as density for scanning, copying, etc.
[ ] key
● When specifying settings, press to select the item below the currently selected item.
● When changing setting values, press to decrease a value.
[Clear] key
Press to delete the entered numbers and text.
[Back] key
Press to return to the previous screen. If you press this key when specifying settings, for example, the
settings are not applied and the display returns to the previous screen.
[OK] key
Press to apply settings or specied details.
[Status Monitor] key
Press to check the status of printing or copy to view the usage history. You can also check the status of the
machine, such as the paper size and the amount remaining in the toner cartridges, or whether any errors
occurred. Display(P. 26)
Basic Operations
23
To Next Page
Loading...
Need help?
General