14
Basic Operation
Main Switch
Shutter Button
<>:The camera does not operate. Set to
this position when not using the
camera.
The camera operates only after the < > switch is turned on.
This switch has three settings:
You can press the shutter button halfway or all the way.
Hold the camera steadily and press the shutter button slowly without any
jerking movement. The difference between halfway and complete pressing
of the shutter button is explained below. Beginners should practice
pressing the shutter button halfway and completely before loading any film.
<>:To turn on the camera, set to this
position.
<>:This is the same as < > except
that it also enables the beeper to
sound in the following cases:
• Focus is achieved in One-Shot AF
mode.
• Focus is achieved with manual
focus.
SEC.01 P013-028 (E) 28-01-2003 10:20 Pagina 14
To Next Page
Loading...
Need help?
General
