96
Selecting and Setting a Custom Functions
1
Open the side door and press the
<> button.
The Custom Function No. appears on
the LCD panel.
2
Turn the < > dial until the
desired Custom Function No.
appears.
3
Press the < > button to change
the Custom Function’s setting.
The Custom Function setting
changes each time you press the
<> button.
• To change C.Fn-0’s setting, press the
<> button for at least 2 seconds.
(
→p.127)
4
Press the shutter button halfway.
The LCD panel returns to the normal
display and the new Custom Function
setting takes effect.
Custom
Function No.
Custom Function
setting
Altered Custom
Function indicator on
exposure
compensation scale
• Altered Custom Function Indicator
After you alter a Custom Function
setting and press the < > button, a
bar appears on the exposure
compensation scale.
The scale’s increments from left to right
are used to denote the 19 Custom
Functions. The left-most increment (–3)
is for C.Fn-1. The next increment to the
right denotes the next Custom Function
in numerical order up to C.Fn-19.
• “C.Fn” is the abbreviation for “Custom Function.”
↑↑ ↑↑
(C.Fn-1) (C.Fn-5) (C.Fn-10) (C.Fn-14)
In this example, the scale shows
that Custom Functions C.Fn-1,
C.Fn-5, C.Fn-10, and C.Fn-14 have
been altered.
SEC.07 P095-114 (E) 29-01-2003 12:29 Pagina 96
To Next Page
Loading...
Need help?
General
