25
Loading and Unloading Film
1
Open the camera back.
• Use your thumb to press the camera
back lock release button and slide
the camera back lever down as
shown by the arrow to open the
camera back.
• If this is difficult to do with one finger,
use one finger to press the lock
release button and another finger to
slide down the lever.
2
Insert the film cartridge at an
angle as shown in the figure.
• Set the < > to < >.
Loading Film
The shutter curtains have been manufactured at very high precision. Never
touch them with your fingers. When loading film, do not touch or damage the
curtains with your fingers or film.
Shutter curtain
1
2
SEC.01 P013-028 (E) 28-01-2003 10:20 Pagina 25
To Next Page
Loading...
Need help?
General
