42
Focusing Point Registration and Switching
By registering the focusing point you often use, you can switch to it
instantly. You can register an off-center focusing point which suits your
preferred framing or the picture-taking moment. Any of the 45 focusing
points can be registered. Only one focusing point can be registered.
Registering a Focusing Point
1
Press the < > button which
remains active for ( ). Then turn
the < > or < > dial to select
the focusing point to be
registered.
Automatic selection Off-center focusing point Center focusing point
2
While pressing the < > button,
press the < > button.
This registers the selected focusing
point.
• When the focusing point is
registered, the LCD panel display will
differ depending on the selected
focusing point. The same display will
also appear when the registered
focusing point is selected.
When using a Speedlite and spot metering, first press the < > button. If you
press the < > button first, the focusing point selection will be canceled.
SEC.03 P033-048 (E) 28-01-2003 16:04 Pagina 42
To Next Page
Loading...
Need help?
General
