71
AE Lock
AE Lock
1
Focus at the point where you
want to lock the exposure
reading.
The exposure setting (shutter speed
and aperture) will be displayed on the
LCD panel and in the viewfinder.
C.Fn-6-2 enables the AEB amount to be set in 1/2-stop increments. (→p.102)
C.Fn-9-2/3 can change the bracketing sequence to underexposure, correct
exposure, and overexposure. (→p.104)
C.Fn-9-1/3 can prevent AEB from being canceled by changing lenses,
rewinding the film, replacing the film, and setting the < > switch to < >.
(→p.104)
C.Fn-5-1 can have the aperture change instead of the shutter speed during
AEB in the manual exposure mode. (→p.101)
AE lock enables you to lock the exposure at a different place from the point
of focus. After locking the exposure, you can recompose the shot while
maintaining the desired exposure level. This feature is useful for backlit and
spotlighted subjects.
2
Press the < > button ( ).
lights in the viewfinder to indicate
that the exposure setting is locked.
• Each time you press the < > button,
it locks the current exposure setting.
• AE lock cancels 6 seconds after
lights in the viewfinder or if you press
the < > button, < > button, or
<> button.
To Next Page
Loading...
Need help?
General
