Canon imageCLASS MF3010 User Manual

Maintenance and Inspections
85RS-005
WARNING
● When cleaning the machine, turn off the machine and computer, and unplug the interface cables and
po
wer plug. Failure to do so can result in a re or electrical shock.
● Unplug the po
wer plug from the AC power outlet periodically and clean the area around the base of
the power plug's metal pins and the AC power outlet with a dry cloth to remove all dust and grime. In
damp, dusty, or smoky locations, dust can build up around the power plug and become damp, which
can cause a short circuit, resulting in a re.
● Use a damp, well wrung-out cloth to clean the machine. Dampen cleaning cloths with water only
. Do
not use alcohol, benzine, paint thinner, or other ammable substances. Do not use tissue paper or
paper towels. If these substances come into contact with electrical parts inside the machine, they may
generate static electricity or result in a re or electrical shock.
● Some ar
eas inside the machine are subject to high voltage. When removing jammed paper or when
inspecting inside of the machine, be careful not to allow necklaces, bracelets, or other metal objects to
touch the inside of the machine, as this can result in burns or electrical shock.
● Do not dispose of used toner cartridges in open ames. This may cause the toner r
emaining inside the
cartridges to ignite, resulting in burns or re.
● If you accidentally spill or scatter toner, car
efully gather the toner particles together or wipe them up
with a soft, damp cloth in a way that prevents inhalation.
Never use a vacuum cleaner that does not have safeguards against dust explosions to clean up spilled
toner. Doing so may cause a malfunction in the vacuum cleaner, or result in a dust explosion due to
static discharge.
● Conrm that the po
wer plug or power connector is inserted completely after cleaning the machine.
Failure to do so can result in an overheating and re.
● Check the po
wer cord and plug regularly. The following conditions may result in re, so please contact
your local authorized Canon dealer or the Canon help line.
- There are burn marks on the power plug.
- The blade on the power plug is deformed or broken.
- The power is turned OFF or ON when bending the power cord.
- The coating of the power cord is damaged, cracked, or dented.
- A part of the power cord becomes hot.
● Check r
egularly that the power cord and plug are not handled in the following manner. Failure to do
so can result in a re or electrical shock.
- The power connector is loosened.
- Stress is being applied to the power cord by a heavy object or by xing it with staples.
- The power plug is loosened.
- The power cord is tied in a bundle.
- A part of the power cord is put in an aisle.
- The power cord is put in front of the heating appliance.
Important Safety Instructions
10

Canon imageCLASS MF3010 Specifications

Printer Specifications

print speed	19 ppm
first print time	8 seconds
print resolution	1200 dpi x 600 dpi
print memory	64MB

Copier Specifications

copy speed	19 cpm
copy resolution	600 dpi x 600 dpi
warm-up time	10 seconds
first copy time	12 seconds
copy memory	64MB

Scanner Specifications

scan type	Color Contact Image Sensor (CIS)
color depth	24-bit
scan resolution	9600 dpi x 9600 dpi

Paper Handling Specifications

standard paper source	150-sheet cassette
paper output	100 sheets
paper weight	16 to 43 lb. bond

Power and Duty Cycle

power consumption (max)	900W
power consumption (energy saver mode)	1.2W
duty cycle	8, 000 pages per month

Dimensions and Weight

dimensions	14.7" (W) x 10.9" (D) x 10.0" (H)
unit weight without cartridge	16.8 lbs
unit weight with cartridge	18.1 lbs