3
Positioning your hands as shown, open the Roll Cover.
4
Fold an A4 sheet lengthwise four times and insert it
through the gap of the Paper Feed Slot. Push the scrap out
toward the Platen.
5
Remove the scrap when it is pushed out onto the Platen.
6
If any scraps remain inside the paper feed slot, repeat steps 4 and 5.
7
Holding it at the positions indicated, close the Roll Cover.
iPF765
Clearing Jammed Paper (Paper Feed Slot)
User's Guide
Troubleshooting Problems Regarding Paper
655
To Next Page
Loading...
