Safety Precautions
Safety Precautions
Safety Precautions ............................................................................................................................................. 714
Legal Notices ..................................................................................................................................................... 716
Safety Precautions
Safety Precautions
Follow the warnings and precautions below to use the printer safely. Do not perform any operations or procedures oth-
er than as described in this manual. Doing so may result in unexpected accidents and can cause a fire or electrical
shocks.
Printer location
Warning
• Do not set up the printer in any location exposed to alcohol, thinner, or other volatile liquids. If these substances come into
contact with electrical components inside the printer, there is a risk of fire or electrical shock.
Caution
• Never install the printer on an unstable or vibrating surface. If it falls over, this could cause personal injury.
• Never set up the printer in a location that is exposed to high humidity or large amounts of dust, or exposed to direct sunlight,
high temperature, or open flame. This could cause a fire or electrical shock. Use the printer location in an environment where
temperature and humidity are within the ranges of 15 °C to 30 °C (59 °F to 86 °F) and 10 to 80% RH (with no condensation).
• Never place the printer on a heavy wool or shag carpet. The fibers may enter the printer and cause a fire.
• Keep the area around the power outlet clear of items so that you can disconnect the power cable immediately if the printer
starts operating abnormally. In the event of a printer malfunction, remove the power cable from the outlet as soon as possible
to prevent fire and electrical shocks.
• Do not install the printer near sources of strong electromagnetic fields, whether equipment that generates such fields or pla-
ces where such fields occur. This could damage the printer or cause malfunction.
Power Supply
Warning
• Never handle the power cable with wet hands. Doing so may cause electrical shock.
• Insert the power cable securely and completely into the power source. If the power cable is not inserted completely, this could
cause a fire or electrical shock.
• Do not use any power cable other than the one provided. This could cause a fire or electrical shock. Never use the power
cable with any other electrical device.
• Never cut the power cable or attempt to modify it, and never stretch it or bend it forcefully. Never place a heavy object on the
power cable. Damaged sections of the power cable could cause a short circuit and may cause a fire or electrical shock.
• Never connect the power cable to a power strip or any power source shared by other electrical devices. This could cause a
fire or electrical shock.
• Never knot the power cable or wrap it around itself. This could cause a fire or electrical shock.
• Periodically disconnect the power cable and use a dry cloth to wipe away dust that has collected on the plug and the area
around the power outlet. Leaving the power cable plugged in and not cleaned for a long period, especially in an area subject
to dust, oil, and humidity, could cause the insulation material to deteriorate and lead to a fire.
Caution
• Always grip the plug to remove the power cable from the power outlet. Pulling on the power cable could damage the cable
and lead to a fire or electrical shock.
• Never use an extension cord. This could cause a fire or electrical shock.
• Never use any power source other than 100–120 / 220–240 V AC. This could cause a fire or electrical shock. The printer
operating conditions are described below. Use the printer under the following conditions.
Power supply voltage: 100–120 / 220–240 V AC
Power supply frequency: 50/60 Hz
Safety Precautions
iPF765
User's Guide
Appendix Safety Precautions
714
To Next Page
Loading...
Need help?
General
Weight and Dimensions
