Important
• Borderless printing is only available with rolls.
• Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular widths. For
information on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (See "Types of
Paper →P.438 ")
• Paper incompatible with the printer's auto cut function can be printed without borders on the left and right sides only.
• These features cannot be used in combination with borderless printing: special page layouts, centering originals, and
printing cut lines on rolls.
• If Fit Paper Size or Print Image with Actual Size (Windows only) is selected when performing borderless printing,
Rotate Page 90 degrees (Conserve Paper) cannot be selected.
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the
edges. If you require higher image quality, specify No in Auto Cut in the printer driver. In this case, the paper can be
printed without borders on the left and right sides only. After ejecting and cutting the printed document, use scissors to
cut away the top and bottom edges.
• By factory default, the ink drying time is disabled for all paper. When you are using paper that takes longer for ink to
adhere for borderless printing and the Cutter Unit touches printing surfaces that are not dry yet, it may damage the
paper or the edge of the document that is cut, depending on frequency of use. In this case, follow these steps to change
the ink drying time.
• On the Main sheet of the printer driver, click Settings in Media Type.
• Select the ink drying time in the Between Pages list of Drying Time.
•
Borderless Printing Method
Choose the method of borderless printing that suits the original, as desired.
•
Print Image with Actual Size
Prints originals at actual size, without enlarging or reducing them. Originals must be prepared in a size that ex-
ceeds the dimensions of the paper by 3 mm (0.12 in) on each side.
Note
• Not all page sizes are available.
• Even if you prepare originals of the same size as the paper size, the originals are automatically enlarged when you print
borderlessly in combination with resizing originals to match the paper size. This may affect image quality. When image
quality is most important, make the original 3 mm longer on each side than the paper size so that the image can be
printed at actual size in borderless printing.
For instructions on borderless printing of photos and images at actual size, refer to the following topics, as appro-
priate for your computer and operating system.
•
Borderless Printing at Actual Size (Windows) →P.92
•
Borderless Printing at Actual Size (Mac OS X) →P.94
iPF765
Borderless Printing at Actual Size
User's Guide
Enhanced Printing Options Printing at full size
91
To Next Page
Loading...
Need help?
General
Weight and Dimensions
