Canon MR-14EX II User Manual

42
Flash Control from the Camera’s Menu Screen
When the MR-14EX II is used with the EOS digital cameras
released up to the first half of 2014, some of the functions as in the
tables below cannot be set from the camera’s flash function
settings screen (p.38). In such a case, set it by operating the MR-
14EX II.
 When Custom Function C.Fn-15-0 is set
E-TTL autoflash
Manual flash
 When Custom Function C.Fn-15-1 is set
All the functions such as wireless multiple flash shooting can be set
from the flash function settings screen.
Functions Which Cannot Be Set from the Flash Function
Settings Screen
Functions Which Cannot Be Set From Camera Operation on MR-14EX II
A:B flash ratio (control)
Page 25
Wireless multiple flash shooting
• Transmission channel
• A:B flash ratio (control)
• Flash exposure compensation amount for
receiver C
Pages 48-50
Functions Which Cannot Be Set From Camera Operation on MR-14EX II
Flash output for flash tube B when tubes
A and B are fired
Page 33
Wireless multiple flash shooting
• Transmission channel
• Flash output for tube B
• Flash output for receiver C
Pages 48, 55-56
Single-side firing (p.26) is not possible when C.Fn-15-1 is set, since C.Fn-
15-1 is a setting for wireless multiple flash shooting.
For Custom Function C.Fn-15 (Macro: Wireless control), see page 63.

Canon MR-14EX II Specifications

General

Type	Macro Ring Lite
Guide Number	14 (ISO 100, meters)
Power Source	4 x AA batteries
Color Temperature	Approx. 5500 K
Compatibility	Canon EOS cameras
Flash Modes	Manual
Recycling Time	Approx. 0.1 - 5.5 seconds
Weight	Approx. 455 g (without batteries)