Menu Description
92
6-axis color adjust
Fine-tune RGB (red, green, blue) and CMY (cyan, magenta, yellow) hues in images.
Option Function
Off Disables 6-axis color adjustment.
Adjust
Use the [ ] / [ ] buttons to select [ Hue], [ Saturation], or
[ Brightness], and use the [ ] / [ ] buttons for adjustment.
• When you are finished adjusting the color, press the OK button.
Reset Returns all adjustment values to zero.
Fine-Tune Gamma
Adjust white, red, green, and blue gamma curves. Red, green, and blue can be adjusted
separately. Adjustments to white are also applied to the three other colors. Note that adjusting
any color will overwrite previous adjustments.
Adjustment is not applied to the projected menu itself.
• For details on gamma correction, see page 89.
• Use input signals or a test pattern for adjustment.
• Adjustment is not applied to the projected menu itself.
• Use the [ ] / [ ] buttons to select a color, and then press the OK button.
Next use the [ ] / [ ] buttons to select a point on the gamma curve, and then use
the [ ] / [ ] buttons to adjust the position of the point. When adjustment is finished,
press the OK button to confirm the setting.
To Next Page
Loading...
Need help?
General
