Menu Description
94
Reset
> [Image adjustment] > [Reset]
Restore the current image quality settings to the factory defaults.
Image priority
> [Image adjustment] > [Image priority]
Select which side image adjustment settings to apply in split-screen mode.
Option Function
OK Resets the image adjustment settings.
Cancel Cancels resetting of the image adjustment settings.
• Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will
restore the settings originally saved for that user profile.
• Only the setting for the combination of input signal and image mode for the current
projection is reset.
Option Function
Primary
Use the side with control rights as the [Primary] side. For image
adjustment settings that are not configured separately, [Primary] side
settings apply to both sides.
Secondary
Not available when the [Primary] side has control rights. To reverse the
side given priority for image adjustment (whether on the left or right
side), switch control rights to the other side and change [Secondary] to
[Primary].
• Can be independently configured
Brightness (P89), Contrast (P89), Gamma (P89), Color adjustment (P89), Fine-Tune
Gamma (P92)
• [Primary] setting also applies to [Secondary]
Image mode (P88), Advanced adjustment except Fine-Tune Gamma (P90 - P92), Lamp
mode (P93)
To Next Page
Loading...
Need help?
General
