73
3.10 — High Flow Oil Pump (Bearing Head)
Carlyle introduced a new high flow oil pump to provide
improved lubrication with the new HFC refrigerants and
POE lubricants. The pump is a durable, automatically
reversible, high flow design. The high flow design improves
lubrication, especially with the new HFC/POE combination,
and provides improved lubrication in the case of a flooded
start. This oil pump is standard on all new and service com-
pressors. See Section 3.9 above for details on oil pressure.
For service replacement, authorized service locations will
have the new high flow oil pump only. See Section 3.11
below.
3.11 — Replacement Oil Pump/Pump End Bearing
Package
The oil pump and pump end bearing are an integral part
called the pump end bearing head. If either the oil pump or
the bearing requires replacement, order part as noted below:
NOTE: The above pump end bearing head packages include a bearing head
with the high side oil safety switch connection. This pump is recommended for
all CFC, HCFC, and HFC refrigeration applications.
PUMP END BEARING
HEAD PACKAGE
USAGE
06DA660126 All 06D, 06CC (16 to 37 Cfm) compressors
06EA660157 All 06E, 06CC (50 to 99 Cfm) compressors
To Next Page
Loading...
Need help?
General
