97
3.30 — Baffle Plate Recommendations
Baffle plates can be used to reduce compressor discharge
gas pulsations. Recommended baffle plate assemblies are
shown below. These plates are designed to create a 6 to 10
psi (0.4 to 0.7 Bars) pressure drop in the discharge gas. Use
only the baffle plate recommended for the application.
These baffle plates, sandwiched between two gaskets, are
installed between the compressor discharge service valve
and the compressor crankcase or cylinder head. For further
details, see Carlyle OEM Bulletins No. 118 and 119.
* Includes baffle plate and 2 gaskets.
† For single-stage application. When using as booster application, use medium temperature
baffle plate.
3.31 — Interstage Pressure Tables (06CC Compressors
Only)
All 06CC compressors are a two-stage design. Therefore,
the pressure measurements are suction, interstage, and dis-
charge. The following tables list the interstage pressures
using R-22, R-407A and R-404A/507 refrigerants.
COMPRESSOR APPLICATION
BAFFLE
PLATE PART
NUMBER*
06D-13, 16, and 20 Cfm
06D-24, 25, 28, 37 and 41 Cfm
06D-24, 25, 28, 37 Cfm and all
06CC 16 to 37 Cfm
low and medium temperature
low temperature only†
medium temperature
and 06CC
06DA660103
06DA660104
06DA660105
06E-50 Cfm
06E-65 to 75 Cfm and
all 06CC 50 to 75 Cfm
06E and 06CC 99 Cfm
06E and 06CC 99 Cfm
low and medium temperature
low and medium temperature
low temperature
medium temperature
06DA660105
06EA660145
06EA660145
06EA660170
To Next Page
Loading...
Need help?
General
