Note: If you use floating mode, you have to register all clerks.
▶ NEW/EDIT USER in USER’S Security Condition
Clerk No. This value can be from 1 to 99.
This value is available up to 22 characters.
This value is available up to 7 characters. It can be
printed on a label and displayed on the scale.
Clerk Password , 4 digit (alphanumeric)
Password: When you enter the password, you have to type clerk number(2digit) and
password(4 digit). For example, if your clerk number is 20 and password is 1234, you
have to type 201234. Minimum password is 3 digit and maximum password is 6 digit.
If there is no level 3 clerk, you can use default value. (Clerk No:1, password:1, Level:3)
Therefore default password is 011.
• You have to set a level 3 clerk. If there is no level 3 clerk, you can use default
password(011) and if any, you cannot use it.
Clerk level: This value can be from 0 to 3. This level is related to menu
1855(Config permission). If clerk 2 is set to level 2, this clerk can use the
function which is set to level 1, 2 in menu 1855 and cannot use the function
which is set to level 3.
It is assigned to employees who is registered but do not use scale.
Lowest level. Normal employees are assigned to level 1.
It is proper for chief clerk.
Highest level. It is proper for store manager.
2.10.5.2 Change Password (Menu code 1852)
( MENU → 8. Scale Config → 5. User/Security Con → 2. Change Password )
• Clerk No. (2 digit) + password (4 digit)
To Next Page
Loading...
Need help?
General
