Casio KL-820 User Manual

E-10
Retrieving a Sentence from Memory
If power is turned off or if Auto Power Off is triggered while you are creating a
sentence, the sentence that was being created is saved temporarily in printer
memory. The next time you turn on power, the message “[SET] TO RECALL” will
appear. Pressing SET will display the sentence currently stored in memory.
* A sentence being created with Layout Printing, Numbering and Bar Code cannot be restored.
Tape Cartridges
Use the procedures described below to load a tape cartridge into the Label
Printer.
Important!
• Never try to push the tape back into the cassette. Once tape is out of the
cassette, there is no way to wind it back in. Trying to do so can cause operational
problems with the Label Printer.
• The following are the tape widths that can be used with this printer: 6mm,
9mm, 12mm, 18mm, 24mm.
To load a tape cartridge
1. Make sure that the Label Printer is turned off.
2. Hook your finger under the center of the cassette cover and then lift up to
open the cover.
• Never touch the print head or other metal objects near the head. These items
become very hot, and touching them creates the risk of burn injury.
Resetting the Memory
You should reset the memory of the Label Printer before using it for the first
time.
Important!
• Resetting Label Printer memory clears its memory of all input data.
To reset the memory
1. Make sure that Label Printer power is off.
2. While holding down the PRINT and SPACE keys, press ON/OFF to turn
power on.
• This prompt confirms whether or not you want to initialize the Label Printer.
IN
I
AL I
Z
E?TI
SET /ESC
3. Release the PRINT, SPACE, and ON/OFF keys.
4. Press SET to initialize the Label Printer or ESC to abort the reset operation
without initializing anything.
Display Language Setting
You can select English, German, French, Italian, Spanish, or Swedish as the
language to be used for display messages. For information about how to change
the language setting, see page E-31.
Auto Power Off Function
If you do not perform any key operation for about six minutes, the Label Printer
automatically turns power off. To restore power, press ON/OFF.
➞

Casio KL-820 Specifications

General

Color	Yes
Printing colors	Black
Print technology	Direct thermal
Vertical printing	No
Maximum resolution	200 x 200 DPI
Maximum print height	24 mm
Maximum print size	-
Keyboard layout	QWERTY
Connectivity technology	Wired
Dimensions (WxDxH)	167 x 223 x 52.5 mm
Print sizes included	1x1 - 4x6
Battery type	AA
Battery technology	Alkaline
Power requirements	AC
Number of batteries supported	6
Tape cutting	Automatic
Number of printing lines (max)	3

Weight and Dimensions

Depth	223 mm
Width	167 mm
Height	52.5 mm
Weight	610 g