11 Laser and High Temperature Precautions
Laser and High Temperature Precautions
(See the label on the projector)
Laser Precautions
Non- U.S. Label : This projector is a Class 1 laser device that conforms to IEC 60825-1:
2014.
• This projector has a built-in laser module. Disassembly or modification is very dangerous and
should never be attempted.
• Any operation or adjustment not specifically instructed by the user’s guide creates the risk of
hazardous laser radiation exposure.
U.S. Label : This projector is a Class 3R laser device that conforms to IEC 60825-1: 2007.
• This projector has a built-in laser module. Disassembly or modification is very dangerous and
should never be attempted.
• Any operation or adjustment not specifically instructed by the user’s guide creates the risk of
hazardous laser radiation exposure.
Vent Outlet Precautions (Label )
• Vent outlets become very hot during projection. Never touch vents or allow them to
become blocked.
• Do not insert foreign objects.
Label
Label
Label
Left side of the projector (viewed from the back)