Step 3 In the Wi-Fi profile screen, do any of the actions to connect to Wi-Fi.
• Select any of the configured Wi-Fi profile and click Connect.
• Press Scan and select one wireless in the Connect to Wi-Fi screen. In the Setup Wi-Fi screen, enter
values in the fields and press Connect.
See the Profile Parameter table in the Set Up a Wi-Fi Profile from the Phone, on page 138 for the field values.
Connect Your Phone to a Wireless Network with WPS
Wi-Fi Protected Setup (WPS) provides an easier way to connect your phone to a wireless network. With WPS,
you don't need to enter detailed settings for the access point to connect as you do with the connection through
Wi-Fi profile. You can either use the WPS button on your access point or the PIN code to connect to the
network through WPS.
The WPS option is available only in the menu on the phone screen. On the phone web page, you can only
configure your phone to connect to a wireless network using Wi-Fi profile.
Before you begin
Enable WPS on your access point.
Procedure
Step 1 Press Applications .
Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi type.
Step 3 Press the navigation key to switch the Wi-Fi type to WPS.
Step 4 Press Set.
Push-button configuration and PIN configuration display under Wi-Fi type. Follow either one of the
following steps to connect to the network.
Step 5 Connect to the network using the WPS button on your access point.
a) Select Push-button configuration.
b) Press the WPS button on your access point.
The button name may vary on your access point.
c) Press Continue on your phone.
Step 6 Connect to the network using a PIN code.
a) Select PIN configuration.
An 8-digit PIN code displays on your phone screen.
b) Go to the web page of your access point and enter the PIN code.
The procedure of entering PIN code may vary on your access points. See the respective user guide of your
access point for more details.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
137
Settings
Connect Your Phone to a Wireless Network with WPS
To Next Page
Loading...
Need help?
General
