d. Press Call to complete the action.
e. Press to exit.
If your administrator has programmed the Assistant function on a line key, the icon in the line key label
changes to to show that call diversion is on.
If you are the only executive assistant with an extension on the phone, the diversion destination number
appears under the Assistant line key.
Deactivate Call Diversion as an Executive Assistant
Before you begin
You are in an executive's pool of assistants, and call diversion is on.
Procedure
Step 1 Do one of the following actions:
• If your administrator has programmed the Assistant function on a line key, press the line key.
• If you do not have the Assistant function on a line key:
a. Press Applications .
b. Select Assistant .
Step 2 Follow the below procedure according to the actual menus displayed on the phone.
• If your administrator configures your extension to connect to the XSI BroadWorks server:
a. Select Divert > Divert.
b. Select Off to deactivate call diversion.
c. Press Set to apply the change.
• If your administrator only enables the feature key synchronization (FKS) on your extension:
a. Press Clr divert.
b. Press to exit.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
159
Settings
Deactivate Call Diversion as an Executive Assistant
To Next Page
Need help?
General
