Reboot Your Phone
You may have to reboot your phone for a software upgrade or other changes to take effect. Your settings or
other customizations do not change.
Procedure
Step 1 Press Applications .
Step 2 Select Device administration > Restart.
Step 3 Select OK to confirm that you want to reboot your phone.
Phone Web Page Preferences
You can customize some settings from the phone web pages.
Related Topics
Phone Web Page, on page 24
Assign a Ring Tone with the Phone Web Page
Procedure
Step 1 On the phone web page, select User Login > Voice > Ext(n), where (n) is the number of an extension.
Step 2 In Call Feature Settings area, choose a ringtone from the Default Ring drop-down list.
If you don't want to specify a ringtone for the phone line, choose No ring. Your phone doesn't ring when
receiving an incoming call.
Step 3 Click Submit All Changes.
Control Ringer Volume
You can control the ringer volume of an incoming call on the phone, or from the phone administration web
page.
If your administrator restricts your ability to control the ringer volume, you can't perform this task from either
the phone volume key or from the phone administration web page.
Before you begin
Your administrator must allow you to control the ringer volume.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
163
Settings
Reboot Your Phone
To Next Page
Loading...
Need help?
General
