Cisco Catalyst 6880-X User Manual

APPENDIX C
Repacking the Switch
If you need to return or move the Catalyst 6880-X switch chassis, follow these steps to repack the switch
using the original packaging material.
Procedure
Step 1
Set the chassis in the bottom pallet.
Figure 64: Packing Material
Step 2
Place the packing bag over the chassis.
Step 3
Place the front-packing material and power supply packing material around the chassis.
Step 4
Place the power supplies in the spaces provided in the power supply packing material.
Step 5
Place the top-packing material over the top of the chassis and power supplies.
Step 6
Place the rack-mount kit and the accessory kit on the top-packing material.
You must include the accessory kit for the final packaging to fit properly.Note
Catalyst 6880-X Switch Hardware Installation Guide
OL-30827-02 101

Cisco Catalyst 6880-X Specifications

General

Brand	Cisco
Model	Catalyst 6880-X
Category	Switch
Language	English