Cisco GRS User Manual

For line card upgrade procedure, refer Line Card Upgrade, page 64.
Configuring Dual Stack Lite Instance
Perform this task to configure dual stack lite application.
SUMMARY STEPS
1.
configure
2.
service cgn instance-name
3.
service-location preferred-active node-id [preferred-standby node-id]
4.
service-type ds-lite instance
5.
portlimit value
6.
bulk-port-alloc size value
7.
map address-pool address
8.
aftr-tunnel-endpoint-address <address>
9.
address-family ipv4
10.
interface ServiceApp41
11.
address-family ipv6
12.
interface ServiceApp61
13.
protocol tcp
14.
session {initial | active} timeout seconds
15.
msssize
16.
external-logging netflow9
17.
server
18.
address A.B.C.D port port-number
19.
external-logging syslog
20.
server
21.
address A.B.C.D port port-number
22.
end or commit
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure
Example:
RP/0/RP0/CPU0:router# configure
Step 1
Cisco IOS XR Carrier Grade NAT Configuration Guide for the Cisco CRS Router, Release 5.2.x
OL-32659-01 77
Implementing Carrier Grade NAT on Cisco IOS XR Software
Configuring Dual Stack Lite Instance

Cisco GRS Specifications

General

Brand	Cisco
Model	GRS
Category	Network Router
Language	English