Cisco IP DECT 6800 Series User Manual

• Alert tone
Step 4 Press up or down on the ring of the navigation cluster to highlight a tone.
Step 5 Press Play to hear the tone.
Step 6 Press Select to save the tone.
Set the Alert Volume
You can change the volume of the tone that you hear when you press Emergency .
You can't change the alert volume of the 6823 Handset.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Audio settings > Alert volume.
Step 3 Press right or left on the ring of the navigation cluster .
Step 4 Press Ok to save the level.
Set the Handset Vibration Mode
You can set the handset to vibrate when you have an incoming call.
You can't set the 6823 Handset to vibrate mode.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Audio settings > Vibrate.
Step 3 Highlight your choice.
• Off (default): When an incoming call rings on the handset, the handset doesn't vibrate.
• Vibrate then ring: When an incoming call rings on the handset, the handset vibrates and then rings.
• Vibrate only: When an incoming call rings on the handset, the handset vibrates. You do not hear the
ringtone.
• Vibrate and ring: When an incoming call rings on the handset, the handset vibrates and rings at the
same time.
Cisco IP DECT 6800 Series User Guide
73
Settings
Set the Alert Volume

Cisco IP DECT 6800 Series Specifications

General

Brand	Cisco
Model	IP DECT 6800 Series
Category	Handsets
Language	English