Cisco Nexus 7710 User Manual

Grounding the Front ID Door 30
Installing Cable Management Frames on a Chassis 33
Attaching the Front Door to the Chassis 38
Installing Air Filters 38
Connecting to the Network 41
CHAPTER 4
Guidelines for Connecting Ports 41
Connecting a Console to the Switch 42
Connecting the Management Interface 43
Creating the Initial Switch Configuration 44
Connecting Interface Ports to the Network 45
Connecting a Fiber-Optic Cable to a Transceiver 45
Disconnecting Optical Ports from the Network 46
Maintaining Transceivers and Optical Cables 46
Managing the Switch 49
CHAPTER 5
Displaying Information About Installed Hardware Modules 49
Displaying the Hardware Inventory for a Switch 52
Displaying the Backplane and Serial Number Information 52
Displaying Environmental Information for a Switch 53
Displaying Temperatures for Modules 57
Connecting to a Module 59
Saving the Module Configuration 60
Displaying Power Usage Information 60
Reloading a Module 60
Rebooting the Switch 61
Overview of Supervisor Modules 62
Shutting Down a Supervisor Module 63
Overview of I/O Module Support 63
Accessing an I/O Module through a Console 65
Displaying Information for the Installed Modules 65
Purging the Module Configuration 68
Shut Down or Power Up an I/O Module 69
Overview of Fabric Module Support 69
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide
OL-30452-01.iv
Contents

Cisco Nexus 7710 Specifications

General

Brand	Cisco
Model	Nexus 7710
Category	Switch
Language	English