CHAPTER 5
Managing the Switch
• Displaying Information About Installed Hardware Modules, on page 49
• Displaying the Hardware Inventory for a Switch, on page 52
• Displaying the Backplane and Serial Number Information, on page 52
• Displaying Environmental Information for a Switch, on page 53
• Displaying Temperatures for Modules, on page 57
• Connecting to a Module, on page 59
• Saving the Module Configuration, on page 60
• Displaying Power Usage Information, on page 60
• Reloading a Module, on page 60
• Rebooting the Switch, on page 61
• Overview of Supervisor Modules, on page 62
• Overview of I/O Module Support, on page 63
• Overview of Fabric Module Support, on page 69
• Power Modes Overview, on page 71
• Overview of Fan Trays, on page 82
Displaying Information About Installed Hardware Modules
To display information about the switch hardware and the hardware modules installed in the switch chassis,
use the show hardware command.
Enter the show hardware command.
Example:
switch# show hardware
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_seri
es_home.html
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide
49OL-30452-01.
To Next Page
Loading...
Need help?
General