Cisco Nexus 7710 User Manual

Figure 13: Connecting the Grounding Cable to the Ground Port on the Cisco Nexus 7710 Chassis
Grounding Cable connected to Ground port on the
chassis
2Front ID Door1
Use the ground port in the back of the Cisco Nexus 7710 chassis for primary earthing when you use the front
ground port for grounding the removable door.
Note
Installing Cable Management Frames on a Chassis
Before you begin
• The chassis must be installed and secured to the rack.
• You must have the following tools and equipment:
• Phillips screwdriver with torque capability (customer supplied).
• The following frames and screws (shipped with the switch):
• Two I/O-module cable management side frames
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide
33OL-30452-01.
Installing the Chassis
Installing Cable Management Frames on a Chassis

Cisco Nexus 7710 Specifications

General

Brand	Cisco
Model	Nexus 7710
Category	Switch
Language	English