EasyManuals Logo
Home>Cisco>Software>Servers

Cisco Servers User Manual

Cisco Servers
654 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
Chapter 3 Setting Up the Cisco Secure ACS HTML Interface
Protocol Configuration Options for RADIUS
3-12
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version. 3.0
RADIUS (Nortel) SettingsThis section allows you to enable the RADIUS
vendor-specific attributes for RADIUS (Nortel). For detailed procedures, see
the Setting Protocol Configuration Options for RADIUS (Nortel) section
on page 3-18.
RADIUS (Juniper) SettingsThis section allows you to enable the
RADIUS vendor-specific attributes for RADIUS (Juniper). For detailed
procedures, see the Setting Protocol Configuration Options for RADIUS
(Juniper) section on page 3-19.
RADIUS (Cisco BBSM) SettingsThis section allows you to enable the
RADIUS vendor-specific attributes for RADIUS (Cisco BBSM). For detailed
procedures, see the Setting Protocol Configuration Options for RADIUS
(Cisco BBSM) section on page 3-20.
While Cisco Secure ACS ships with these listed VSAs prepackaged, it also
enables you to define and configure custom attributes for any VSA set not already
contained in Cisco Secure ACS. If you have configured a custom VSA and a
corresponding AAA client, from the Interface Configuration section you can
select the custom VSA and then set the options for how particular attributes
appear as configurable options on the User Setup or Group Setup page. For
information about creating user-defined RADIUS VSAs, see the User-Defined
RADIUS Vendors and VSA Sets section on page E-27.
Radius (Cisco Aironet) is not listed in Internet Configuration because there is no
configuration required.
Setting Protocol Configuration Options for (IETF) RADIUS
This procedure enables you to hide or display any of the standard (IETF) RADIUS
attributes for configuration from other portions of the Cisco Secure ACS HTML
interface.
Note If the Per-user TACACS+/RADIUS Attributes check box in Interface
Configuration: Advanced Options is selected, a User check box appears
alongside the Group check box for each attribute.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Servers and is the answer not in the manual?

Cisco Servers Specifications

General IconGeneral
BrandCisco
ModelServers
CategorySoftware
LanguageEnglish

Related product manuals