Chapter 4 Setting Up and Managing Network Configuration
Network Device Group Configuration
4-24
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Tip If the Network Device Groups table does not appear, click Interface
Configuration, click Advanced Options, and then select the Network
Device Groups check box.
Step 3 At the bottom of the page, click Rename.
Result: The Rename Network Device Group page appears.
Step 4 In the Network Device Group Name box, type the new name.
Step 5 Click Submit.
Result: The name of the NDG is changed.
Deleting a Network Device Group
To delete an NDG, follow these steps:
Step 1 In the navigation bar, click Network Configuration.
Result: The Network Configuration section opens.
Step 2 In the Network Device Groups table, click the NDG to be deleted.
Tip If the Network Device Groups table does not appear, click Interface
Configuration, click Advanced Options, and then select the Network
Device Groups check box.
Step 3 At the bottom of the page, click Delete Group.
Result: A confirmation dialog box appears.
Step 4 Click OK.
Result: The name of the NDG is changed.
To Next Page
Loading...
Need help?
General